2 non polarized wires for audio.
Specifications of the system
Digital installation of two non-polarized wires for electronic door entry systems.
Capacity to connect up to 120 telephones and combinations of up to 3 accesses (outdoor panels) without switching units.
Possibility to do other types of configuration, combining the 2Plus system with the Plus system, by using the CD-2PLUS digital converter.
The maximum number of access doors would be reduced to two. Audio module with individual panel and telephone volume adjustments.
Privacy on audio and door open progresses.
Illuminated indication of short circuit in the installation and other types of breakdown.
Indication, through telephone tones and color change of the light button, that another panel is in use.
Telephone hangup detection, which avoids fixed busy channel times.
Activation of AC or DC electric lock-release, with acoustic confirmation of opening.
Removable connection terminals for easy connection.
Use one EL620/2PLUS module per panel.
In compositions with more than two pushbuttons, add one EL610D 10P module for every 10 pushbuttons until the desired number of pushbuttons (max. 120 telephones) is obtained.
In residential complexes with general panel(s) and several interior buildings, configure the interior buildings as described in the previous section, using a CD-2PLUS digital converter in each of them. The general panel(s) must be configured with 4-wire Plus technology.
The installation between the main panel and the interior buildings shall be 3-wire.
In panel assemblies with more than one horizontal module, use one long RAP-610D link cable for each additional horizontal module.
Choose 2Plus technology telephones: T-5720 o T-5822VD.
The maximum number of telephones in the same apartment is two (three in the case of the T-5822VD).
Use one FA-PLUS/C power supply for each panel, regardless of the number of telephones.
If there are CD-2PLUS, digital converters, add a FA-PLUS/C power supply for each of them.
Use a 12Vdc electric door release.
AC door release can be used by adding a TF-104 transformer.
Download a sample scheme of the system here.
Technology information is available on the "downloads" tab of the EL620/2PLUS control modul.